Tag Archives: webcast

Webinar: Designing Advanced Embedded Systems with Xilinx Zynq

Techonline is offering a webinar this week about the Xilinx Zynq. The title of the webcast is Designing Advanced Embedded Systems with Xilinx Zynq: How to Break Software Bottlenecks with Accelerators. The online seminar will take place Thursday, September 5, 2013 at 11am PST (2pm EST, 6pm GMT). The webinar will be presented by Barrie Mullins (Zynq Development Director, Xilinx) and Rob Armstrong Jr.(Processor Specialist FAE, Xilinx).

Continue reading

Webinar: Accelerating OpenCV with Zynq-7000, Vivado HLS Video Libraries

Xilinx is hosting a webinar about the Vivado HLS Video Libraries. The webcast will show how to rapidly accelerate real-time computer vision algorithms and integrate them into designs using Xilinx Zynq-7000 All Programmable SoC devices. The title of the webinar is: How to Accelerate OpenCV Applications with Zynq-7000 All Programmable SoC using Vivado HLS Video Libraries. The online seminar will take place Wednesday, August 28, 2013 at 8am PST (11am EST, 3 GMT).

Continue reading

SEU Immunity: Is Your Design Really Safe? Webinar

Microsemi will host a webinar on single event upset (SEU). Attendees will learn about the risks and consequences of configuration failures in Flash, Antifuse and SRAM FPGA technologies, as well as background information on the physical failure mechanisms associated with SEUs. The webcast is titled SEU Immunity: Is Your Design Really Safe? The online seminar will take place Wednesday, April 17 at 8 am PDT.

Continue reading

Webinar: Breakthrough Many-Core Processing Using the Altera Cyclone FPGA to Accelerate Your Embedded System

Newark element14 and Impulse Accelerated Technologies are hosting an online seminar this week. The hands-on session will discuss programming in C code on a FPGA using the Altera Cyclone development platform. Attendees will learn how to leverage distributed processing for a C code algorithm across the entire embedded system — from the FPGA to the embedded processor. The title of the webinar is Breakthrough Many-Core Processing: Using the Altera Cyclone FPGA to Accelerate Your Embedded System. The free webcast will take place on Wednesday, July 25, 2012 at 12 noon CST.

Continue reading

Webinar: How to Achieve the Highest NAND Flash Application Data Rate

CAST and Evatronix will host a webinar about using CAST’s new NAND Flash Controller Core as part of an overall design strategy to achieve the highest possible memory data input and output rates for advanced applications. The webcast will take place Wednesday, November 30, 2011 at 1:00 PM EST. The online seminar is free, but you need to register in advance.

Continue reading

Webinar: Introduction to FPGA Design Using MATLAB and Simulink

MathWorks and Altera are offering a webinar about how to reduce FPGA design cycle time by 33-50% by adopting workflows based on MATLAB and Simulink. The webcast will demonstrate how MATLAB and Simulink are used to design FPGAs for applications such as signal processing, image processing, communications, and control systems. The Introduction to FPGA Design Using MATLAB and Simulink webinar will take place October 5th. The online event will take place at two different times: 6:00 AM and 11:00 AM PDT.

Continue reading

Three Reasons to Use FPGAs in Industrial Applications Webinar

Altera is offering a webinar that presents three reasons why FPGAs should be used in industrial applications. Serving as coprocessors or in systems-on-a-chip (SoC) implementations, FPGAs can help lower the total cost of ownership of industrial applications. The webcast is titled, 3 Reasons to Use FPGAs in Industrial Applications. The online seminar is presented by Jason Chiang, Sr. Technical Marketing Manager at Altera.

Continue reading

Using the Keil MDK in a SmartFusion Embedded Software Design Webinar

Actel and Keil are hosting a webinar titled, Using the Keil MDK in a SmartFusion Embedded Software Design. The webcast will take place Wednesday, June 9, 2010 from 9 am to 10 am Pacific time. The online seminar will introduce the Keil Microcontroller Development Kit (MDK) tools for creating and debugging embedded software applications targeting Actel’s Cortex-M3 based SmartFusion intelligent mixed signal FPGAs.

Continue reading

Webinar: Designing with SmartFusion Intelligent Mixed Signal FPGAs

Actel will host a webinar titled, Designing with SmartFusion Intelligent Mixed Signal FPGAs. The webcast will take place 9:00 a.m. – 10:00 a.m. (PDT) on Wednesday, May 26, 2010. SmartFusion integrates an FPGA, a hard ARM Cortex-M3 based microcontroller subsystem (MSS) and programmable analog, offering full customization, IP protection and ease-of-use.

Continue reading