Lattice Sensor Extender Reference Design Uses Two MachXO2 FPGAs

Lattice Semiconductor SensorExtender reference design

Lattice Semiconductor recently introduced the SensorExtender reference design. The Sensor Extender is a low-cost solution for remotely locating image sensors up to eight meters away from the image signal processor (ISP) and transmit and receive video signals at resolutions that range up to 720p60 and 1080p30. The reference design is tested with the Aptina MT MT9M024 and the Lattice HDR-60 camera development kit’s base board.

Lattice Semiconductor Sensor Extender block diagram

The SensorExtender reference design uses inexpensive low-cost Cat5E cable to carry high-definition video and to send I2C sensor control signals from the ISP during the vertical blanking period. Three twisted pairs carry the video and commands while a fourth pair provides power and ground to the remotely located sensors.

The Sensor Extender uses two Lattice MachXO2 low density FPGAs. One FPGA is placed next to the image sensor and the other is located just before the ISP. A single twisted pair CAT5E/6 cable connects the two.

The SensorExtender solution features a variety of interfaces (before serialization) for CSI-2, HiSPi, parallel, or sub-LVDS image sensors along with support for extending two or more image sensors. The reference design also allows parallel or serial ISP interfaces (after-deserialization). Designers can configure parallel interfaces to handle 1.8V, 2.5V, or 3.3V LVCMOS levels.

The Lattice solution serves applications that require image sensors to be separated from the image signal processor, which are often placed in tight spaces without room for adjacent ISPs to process the image. The SensorExtender may link a single sensor to an ISP or connect a number of sensors to a central processor.

The SensorExtender kit is ideal for medical probes, large screen TVs with an integrated HD camera, surveillance domes, piping inspection ports, and point-of-sale scanners. It is available now. The price is $295. The additional cost for the HDR-60 development kit is $425.

More info: Lattice Sensor Extender Reference Design