TB-7V-2000T-LSI ASIC Development Test Platform Features Virtex-7 FPGA

Tokyo Electron Device TB-7V-2000T-LSI ASIC development test platform

Tokyo Electron Device Limited (TED) introduced the TB-7V-2000T-LSI ASIC development test platform. The inrevium TB-7V-2000T-LSI features a Xilinx Virtex-7 FPGA. The TB-7V-2000T-LSI makes it possible to perform emulation and prototyping of large SoCs using a single FPGA instead of the multiple chips required in the past. The TB-7V-2000T-LSI ASIC development test platform can be ordered today. The tool will be begin shipping in early December 2012.

TED inrevium TB-7V-2000T-LSI ASIC development test platform

The ASIC development test platform includes five high-speed I/O connectors and a Kintex-7 325T expansion FPGA for the addition of daughter interface cards, control logic, and other additional functions as needed. Use of a single FPGA results in faster processing. It also improves development efficiency by reducing the time required for implementation when a design is split into multiple parts.

The TB-7V-2000T-LSI can be used to configure a prototyping platform with excellent expandability and enhanced flexibility. When used in conjunction with the reference designs provided for the USB and PCI Express interfaces, emulation can include high-speed external control of the SoC logic. It is also possible to perform testing under actual operating conditions at faster clock frequencies than in the past.

The inrevium TB-7V-2000T-LSI features high-speed memory (DDR3 SDRAM 1600 Mbps), USB 2.0/3.0, DVI input and output, and PCI Express). The TB-7V-2000T-LSI is an ideal test platform for a wide range of different ASIC developments, including SoCs for next-generation image processing, audio/video multimedia, and high-speed communication control.

Inrevium TB-7V-2000T-LSI Features

  • FPGA: XC7V2000T-2FLG1925, XC7K325T-2FFG900
  • Supports configuration using MicroSD card or NAND flash memory (Virtex-7 FPGA only)
  • QSPI (Kintex-7 FPGA only)
  • DDR3 SDRAM (1600Mbps) 2Gbit x 8
  • DVI (Tx, Rx), UXGA supported
  • USB 2.0/3.0 (device) Type-B
  • PCI Express Gen 2, 8-lane
  • MMCX clock input/output
  • GPIO pin header
  • High-speed I/O connector (120-pin) x 5
  • FMC HPC (TB-FMCH-VBY1 only)
  • RS-232C (D-sub 9-pin)
  • DIP switch, Push switch, LED
  • Reference design for DDR3 SDRAM interface, DVI, USB 2.0/3.0

More info: Tokyo Electron Device Limited