FPGA Blog - field programmable gate array and structured asic

Share/BookmarkSubscribe
'FPGA-based Product' Category Archive

Six New FPGA-based NI FlexRIO Adapter Modules

Posted by Ken Cheung in FPGA-based Product,Tool on Tuesday, May 31, 2011

National Instruments announced six new adapter modules for their NI FlexRIO family. The modules feature FPGA-based reconfigurable I/O for general-purpose automated test and high-speed digital communication. The new FlexRIO adapter modules include four general-purpose digitizers, a module for high-speed digital I/O and a 16-bit analog-to-digital converter (ADC) from Analog Devices (ADI) that is optimized for [...]

QuiXilica Proteus-V6 FPGA Board for VME, VXS Applications

Posted by Ken Cheung in FPGA-based Product on Friday, May 27, 2011

TEK Microsystems rolled out their QuiXilica Proteus-V6 FPGA board for VME and VXS applications. The QuiXilica Proteus-V6 features three Xilinx Virtex-6 FPGA devices, two e2v EV10AQ190 10-bit A/D converters, 5 GSPS signal acquisition, and sample accurate synchronization across multiple boards. The TEK FPGA board supports two channels at 5 GSPS, four channels at 2.5 GSPS, [...]

Ariane AC-CPM1 AutoGrade J2931 Board Features ProASIC3 FPGA Devices

Posted by Ken Cheung in FPGA-based Product on Thursday, May 26, 2011

The Ariane Controls AC-CPM1 AutoGrade J2931 is an evaluation and development board optimized for inband signaling between Plug-In Electric Vehicles (PEV) and the Electric Vehicle Supply Equipment (EVSE). The AC-CPM1 SAE J2931 evaluation and development board uses Microsemi’s ProASIC3 flash FPGA devices to speed design cycles for systems implementing automotive standard J2931 for communication. The [...]

Pentek Cobalt Virtex-6 Family for CompactPCI System Designs

Posted by Ken Cheung in FPGA-based Product on Monday, May 23, 2011

Pentek’s Cobalt board family is now available for use in CompactPCI (cPCI) systems. The Cobalt boards feature a customizable Virtex-6 FPGA for on-board signal processing, dedicated DMA channels and memory buffers for each I/O stream, and multi-channel, multi-board synchronization. The Pentek Cobalt cPCI module family is available now with prices starting at $11,600 USD with [...]

Echotek SCFE-V6-OVPX, Ensemble HCD3210 and SFM3010 OpenVPX Modules

Posted by Ken Cheung in FPGA-based Product on Wednesday, May 11, 2011

Mercury Computer Systems introduced 3U and 6U OpenVPX modules for Electronic Warfare/Signals Intelligence (EW/SIGINT) applications. The Ensemble HCD3210 processing module features a Virtex-6 FPGA with a Freescale dual-core 8640D general purpose processor. The Ensemble SFM3010 includes a low-latency, deterministic SRIO fabric data plane, a GigE switching control plane and an IPMI-based system management plane. The [...]

CommAgility AMC-2C6678 DSP/FPGA Card

Posted by Ken Cheung in FPGA-based Product on Wednesday, April 27, 2011

CommAgility introduced the AMC-2C6678 AdvancedMC module. The AMC-2C6678 features a Xilinx LX240T Virtex-6 FPGA, two Texas Instruments (TI) TMS320C6678 digital signal processors (DSPs), Serial RapidIO (SRIO) V2.1, IDT CPS-1848 SRIO Gen2 switch, Gigabit Ethernet interface, three front panel SFP+ optical interfaces, up to 1Gbyte of 64-bit wide DDR3-1600 SDRAM (for each DSP), and dual mini-SAS [...]

Pentek Cobal Model 71662 Xilinx Virtex-6 FPGA Board

Posted by Ken Cheung in FPGA-based Product on Tuesday, April 26, 2011

Pentek introduced the Cobal Model 71662 Xilinx Virtex-6 FPGA board. A variety of FPGA sizes are available for the Pentek 71662 module. Supported FPGAs include the LX240T, LX365T, SX315T, or SX475T devices. The 71662 features four transformer isolated input channels; Texas Instruments ADS5485 16-bit, 200 MHz ADC; built-in digital down converters (DDCs); input bandwidth from [...]

Acromag VPX-VLX 3U VPX FPGA Modules

Posted by Ken Cheung in FPGA-based Product on Wednesday, April 20, 2011

Acromag announced their VPX-VLX series of 3U VPX FPGA boards. The VPX-VLX features a Xilinx VLX85T, VLX110T, or VLX155T FPGA. The Xilinx Virtex-5 FPGA has been enhanced with multiple high-speed memory buffers and a high-throughput PCIe interface. The cards are available in a format designed for use in air-cooled or conduction-cooled systems suitable for -40 [...]

Innovative Integration X6-400M PCI Express XMC Module

Posted by Ken Cheung in FPGA-based Product on Thursday, April 14, 2011

Innovative Integration introduced the X6-400M PCI Express XMC module. The X6-400M features Xilinx Virtex 6 SX315T (LX240T and SX475T options), two 14-bit 400 MSPS A/Ds, either AC or DC-coupled, two 500MSPS update rate DACs. The DAC can be used a single 1 GHz output channel. The FPGA logic can be fully customized using VHDL and [...]

Opal Kelly XEM6010-LX45 and XEM6010-LX150 USB 2.0 Integration Modules

Posted by Ken Cheung in FPGA-based Product on Thursday, April 7, 2011

Opal Kelly introduced the XEM6010-LX45 and XEM6010-LX150 USB 2.0 integration modules. The XEM6010 features the Xilinx Spartan-6 FPGA, high-speed USB 2.0 FPGA configuration and data transfer, integrated DDR2 SDRAM, power supplies, and configuration flash. The XEM6010-LX45 is based on the Xilinx XC6SLX45 FPGA and the XEM6010-LX150 is based on the Xilinx XC6SLX150 FPGA. The XEM6010-LX45 [...]

« Newer Posts || Older Posts »

Custom Search

FPGA Blog Newsletter
Don't have time to visit FPGA Blog everyday? Then sign up for our free newsletter. We'll send you an email when we have something to share with you. Your email address will be kept confidential and we will not share, sell, or rent it to anyone. You can unsubscribe at any time by clicking a link in the email.

Enter your email address to sign up for our free newsletter:  

If you are familiar with RSS feeds, you can also sign up for our free blog feed. Our RSS feed is updated in real-time while our newsletter is updated daily.