HuMANDATA Introduces EDA-301 USB-FPGA Board

HuMANDATA EDA-301 Altera Cyclone IV USB-FPGA board

HuMANDATA introduced their EDA-301 USB-FPGA board. The EDA-301 features the Altera Cyclone IV E FPGA (EP4CE15F17C8N), 5.0 V external input or USB bus power, and 56 user I/O’s, which are divided into two I/O banks. The configurable PCB includes on-board oscillators, user switches and LEDs. It measures 53 mm x 54 mm, and can be easily swapped for a different FPGA/CPLD board.

The HuMANDATA EDA-301 USB-FPGA board includes a FTDI FT2232H dual channel USB controller IC. One channel is available for a user communication interface. The other channel is configured as an I/F for FPGA configuration and configuration device access. In addition, the EDA-301 is compliant with the RoHS Directive, and is designed for lead-free soldering.

HuMANDATA Altera Cyclone IV USB-FPGA Board Features

  • Altera Cyclone IV E FPGA
  • Altera EPCS16SI8N configuration device
  • FTDI FT2232H USB control IC
    • FPGA configuration
    • Configuration device access (Write/Reset/Erase)
    • User communication I/F
    • Includes configuration tool
  • 50MHz Oscillator (50 ppm) or external inputs
  • User switch (push, 1-bit DIP)
  • Four user LEDs
  • Seven segment LED module
  • Status LED (Power, Done)
  • Power-on reset
  • JTAG Connector(10 pin socket) for download cable connection
  • JTAG buffer for stable download or debug
  • 5.0 V single power supply operation (external input or USB power)
  • High quality six layers PCB (Immersion gold)
  • Compact size 2.087″ x 2.126″ (53 x 54 mm)
  • ESD and surge protection component for USB I/F
  • Tested I/O
  • RoHS compliance

More info: HuMANDATA Altera Cyclone IV USB-FPGA Board